Free Crochet Pattern from Lion Brand Yarn, formatted for input to refreshable Braille displays or Braille software
Edie Scarf
Lion Brand® Vanna's Choice®
Pattern Number: 80927AD This beautiful scarf features lacy motifs for a feminine touch.

SKILL LEVEL:  Experienced (Level 5)
SIZE: One Size
9 x 73 in. (23 x 185.5 cm)

CORRECTIONS: (applied )
SQUARE (make 8) With B A, ch 4; join with sl st in first ch to form a ring. Rnd 1 (RS): Ch 3 (counts as dc), work 15 dc in ring; change to B in last dc; join with sl st in top of beg ch. Fasten off B A. Rnd 2: With A B, ch 4 (counts as hdc, ch 2), (hdc in next dc, ch 2) 15 times; join with sl st in 2nd ch of beg ch. Fasten off B. Rnd 3: With A, (Sl st, ch 3, 2 dc) in first ch-2 sp, ch 1, (3 dc in next ch-2 sp, ch 1) 15 times; join with sl st in top of beg ch. The above is only a summary of corrections; the corrected pattern text is below (if free) or shipped upon completion of order (if purchased)

MATERIALS

860-151 Vanna's Choice Yarn: Charcoal Grey

Dark gray


Quantity needed: 3 Skeins
Estimated Price: $ 13.17
Note: (A)

860-099 Vanna's Choice Yarn: Linen

Dusty off-white, almost gray


Quantity needed: 1 Skeins
Estimated Price: $ 4.39
Note: (B)

Lion Brand Crochet Hook - Size J-10 (6 mm)
Quantity needed: 1
Estimated Price: $ 2.45


Lion Brand Large-Eye Blunt Needles (Set of 6)
Quantity needed: 1
Estimated Price: $ 3.59

GAUGE:
One Square = 6 1/2 x 6 1/2 in. (16.5 x 16.5 cm). When you match the gauge in a pattern, your project will be the size specified in the pattern and the materials specified in the pattern will be sufficient. The needle or hook size called for in the pattern is based on what the designer used, but it is not unusual for gauge to vary from person to person. If it takes you fewer stitches and rows to make your swatch, try using a smaller size hook or needles; if more stitches and rows, try a larger size hook or needles. Making a Gauge Swatch
Exact gauges is not imporant to this project.

STITCH EXPLANATION:
sc2tog (sc dec) Insert hook into st and draw up a lp.

Insert hook into next st and draw up a lp.

Yo, draw through all 3 lps on hook.


sc3tog (sc double dec) Insert hook into st and draw up a lp.

(Insert hook into next st and draw up a lp) twice.

Yo and draw through all 4 lps on hook.


hdc2tog (hdc dec) Yo, insert hook into st and draw up a lp.

Yo, insert hook into next st and draw up a lp.

Yo and draw through all 5 lps on hook.


hdc3tog (hdc double dec) Yo, insert hook into st and draw up a lp.

(Yo, insert hook into next st and draw up a lp) twice.

Yo and draw through all 7 lps on hook.

NOTES:
To change color, work last st of old color to last yo.

Yo with new color and draw through all lps on hook to complete st.


INSTRUCTIONS



SCARF
SQUARE (make 8)
With A, ch 4; join with sl st in first ch to form a ring.


Rnd 1 (RS): Ch 3 (counts as dc), work 15 dc in ring; change to B in last dc; join with sl st in top of beg ch.

Fasten off A.


Rnd 2: With B, ch 4 (counts as hdc, ch 2), (hdc in next dc, ch 2) 15 times; join with sl st in 2nd ch of beg ch.

Fasten off B.


Rnd 3: With A, (Sl st, ch 3, 2 dc) in first ch-2 sp, ch 1, (3 dc in next ch-2 sp, ch 1) 15 times; join with sl st in top of beg ch.


Rnd 4: Sl st in next 2 dc, ch 1, sc in next ch-1 sp, ch 3, sc in next ch-1 sp, ch 5, *sc in next ch-1 sp, (ch 3, sc in next ch-1 sp) 3 times, ch 5; rep from * 2 more times, (sc in next ch-sp, ch 3) twice; join with sl st in first sc.


Rnd 5: (Sl st, ch 3, 2 dc) in first ch-3 sp, (5 dc, ch 2, 5 dc) in next ch-5 sp, *3 dc in each of next 3 ch-3 sps, (5 dc, ch 2, 5 dc) in next ch-5 sp; rep from * 2 more times, 3 dc in last 2 ch-3 sps; join with sl st in top of beg ch.

Fasten off.



WEDGE INSETS
Note: Inset is worked along one side each of two Squares, forming a wedge between Squares.

Beg with any two Squares.


Row 1 (RS): Join A with sl st in any corner ch-2 sp of first Square; ch 1, work 20 sc evenly spaced along side of first Square, ch 3, work 20 sc evenly spaced along one side of 2nd Square - 40 sts at end of row.


Row 2 (WS): Ch 1, turn; working in front lps only, sc2tog, sc in each sc to ch-3 sp, sc3tog (inserting hook in each ch of ch-3 sp), sc in each st across to last 3 sts, sc2tog, sc in last st - 39 sts.


Row 3: Ch 1, turn; working in back lps only, sc2tog, sc in next 16 sts, sc3tog, sc in next 15 sts, sc2tog, sc in last st - 35 sts.


Row 4: Ch 1, turn; working in front lps only, sc2tog, sc in next 14 sts, sc3tog, sc in each st across to last 3 sts, sc2tog, sc in last st; change to B in last st - 31 sts.

Do not fasten off A.


Row 5: With B, ch 2, turn; working in back lps only, hdc2tog, hdc in next 12 sts, hdc3tog, hdc in each st across to last 3 sts, hdc2tog, hdc in last st - 27 sts.

Fasten off B.


Row 6 (RS): Return to beg of Row 5, pick up A and working in both lps, insert hook in top of beg ch and draw a lp of A, sc2tog, sc in next 10 sts, sc3tog, sc in each st across to last 3 sts, sc2tog, sc in last st - 23 sts at end of row.


Row 7: Ch 1, turn; working in front lps only, sc2tog, sc in next 8 sts, sc3tog, sc in each st across to last 3 sts, sc2tog, sc in last st - 19 sts at end of row.


Row 8: Ch 1, turn; working in back lps only, sc2tog, sc in next 6 sts, sc3tog, sc in each st across to last 3 sts, sc2tog, sc in last st - 15 sts at end of row.


Row 9: Ch 1, turn; working in front lps only, sc2tog, sc in next 4 sts, sc3tog, sc in each st across to last 3 sts; sc2tog, sc in last st - 11 sts at end of row.


Row 10: Ch 1, turn; working in back lps only, sc2tog, sc in next 2 sts, sc3tog, sc in each st across to last 3 sts, sc2tog, sc in last st - 7 sts at end of row.


Row 11: Ch 1, turn; working in front lps only, sc2tog, sc3tog, sc2tog - 3 sts at end of row.

Fasten off.


Work Wedge Inset along opposite sides of the same Squares.


Continue to work Wedge Insets until all Squares are joined into a strip.



END TRIANGLES
Note: End Triangles are worked on the rem sides of the first and last Squares of the strip to form the corners of the Scarf.


Row 1 (RS): Join A with sl st in corner ch-2 sp at tip of first Square, ch 1, work 20 sc evenly spaced along side of first Square.


Row 2 (WS): Ch 1, turn; working in front lps only, sc2tog, sc in each st across to last 3 sts, sc2tog, sc in last st - 18 sts at end of row.


Row 3: Ch 1, turn; working in back lps only, sc2tog, sc in each st across to last 3 sts, sc2tog, sc in last st - 16 sts at end of row.


Row 4: Rep Row 2; change to B in last st - 14 sts.

Do not fasten off A.


Row 5: With B, ch 2, turn; working in back lps only, hdc2tog, hdc in each st across to last 3 sts, hdc2tog, hdc in last st - 12 sts at end of row.

Fasten off B.


Row 6 (RS): Return to beg of Row 5, pick up A and working in both lps only, insert hook in top of beg ch and draw up a lp of A, sc2tog, sc in each st across to last 3 sts, sc2tog, sc in last st - 10 sts at end of row.


Rows 7 and 8: Rep Rows 2 and 3 - 6 sts at end of Row 8.


Row 9: Rep Row 2 - 4 sts at end of row.


Row 10: Ch 1, (sc2tog) twice - 2 sts at end of row.


Row 11: Ch 1, sc2tog - 1 st at end of row.


Fasten off.

Rep End Triangle for other side of first Square and both rem sides of last Square.



FINISHING
Edging
Rnd 1: Join A with sl st in one corner of Scarf to work along long edge; ch 1, **work 12 sc evenly spaced across edge of End Triangle, (hdc, dc, hdc) in sp between End Triangle and next Wedge Inset, work 24 sc evenly spaced across edge of Wedge Inset, *(hdc, dc, hdc) in sp between Wedges, work 24 sc evenly spaced across edge of next Wedge Inset; rep from * to last End Triangle, (hdc, dc, hdc) in sp between Wedge Inset and last End Triangle, work 12 sc evenly spaced across edge of End Triangle, ch 2 (corner); working along short edge, work 12 sc evenly spaced across edge of End Triangle, ch 2, work 12 sc evenly spaced across edge of next End Triangle, ch 2 (corner); working along long edge; rep from ** once more; join with sl st in first sc.


Rnd 2: Ch 1, working in back lps only, sc in each sc around, working (sc, ch 1, sc) in each corner ch-2 sp; join with sl st in first sc; change to B in join.

Fasten off A.


Rnd 3: With B and working in back lps only, ch 1, *(sc, hdc, dc, tr) in next st, sk next st, sl st in next st, sk next st; rep from * around entire Scarf; join with sl st in first sc.

Fasten off.

Weave in ends.

ABBREVIATIONS / REFERENCES
beg = begin(s)(ning)
ch(s) = chain(s)
ch-space = space previously made
dc = double crochet
dec = decreas(e)(s)(ing)
hdc = half double crochet
lp(s) = loop(s)
rem = remain(s)(ing)
rep = repeat(s)(ing)
rnd(s) = round(s)
RS = right side
sc = single crochet
sk = skip
sl st = slip stitch
sp(s) = space(s)
st(s) = stitch(es)
tr = treble (triple) crochet
WS = wrong side
yo = yarn over


Every effort has been made to have the knitting and crochet instructions accurate and complete. We cannot be responsible for variance of individual knitters and crocheters, human errors, or typographical mistakes.
We want your project to be a success! If you need help with this or any other Lion Brand pattern, e-mail support is available 7 days per week by mailing support@lionbrand.com.

For over a thousand free patterns available in versions for the vision-impaired, visit our website http://www.LionBrand.com

To order, visit our website http://www.e-yarn.com or call: (800) 258-9276 any time!

Copyright ©1998-2011 Lion Brand Yarn Company, all rights reserved. No pattern or other material may be reproduced -- mechanically, electronically, or by any other means, including photocopying -- without written permission of Lion Brand Yarn Company.

Click here for Non-Braille display: View With Images