Free Crochet Pattern from Lion Brand Yarn, formatted for input to refreshable Braille displays or Braille software
Father's Day Crochet Socks
Lion Brand® Sock-EaseTM
Pattern Number: L0143AD

SKILL LEVEL:  Experienced (Level 5)
SIZE:
Finished Foot and Leg Circumference 8 3/4 (10, 11 1/2, 12 1/2) in. (22 (25.5, 29, 32) cm) Note: Foot Circumference will fit foot widths Narrow (Medium, Wide, X-Wide)

CORRECTIONS: None

MATERIALS

240-174 Sock-Ease Yarn: Green Apple

Olive green


Quantity needed: 1 Skeins
Estimated Price: $ 8.92
Note: (A)

240-178 Sock-Ease Yarn: Snow Cone

Teal blue


Quantity needed: 1 Skeins
Estimated Price: $ 8.92
Note: (B)

Lion Brand Split Ring Stitch Markers
Quantity needed: 1
Estimated Price: $ 2.49


Lion Brand Large-Eye Blunt Needles (Set of 6)
Quantity needed: 1
Estimated Price: $ 3.59

Additional Materials
Crochet hook size C-2 (2.75 mm) Crochet hook size D-3 (3.25 mm)
GAUGE:
20 sts = 4 in. (10 cm) in extended single crochet (Esc) with larger hook. When you match the gauge in a pattern, your project will be the size specified in the pattern and the materials specified in the pattern will be sufficient. The needle or hook size called for in the pattern is based on what the designer used, but it is not unusual for gauge to vary from person to person. If it takes you fewer stitches and rows to make your swatch, try using a smaller size hook or needles; if more stitches and rows, try a larger size hook or needles. Making a Gauge Swatch
Exact gauges is not imporant to this project.

STITCH EXPLANATION:
Esc (extended single crochet) Insert hook in indicated st and draw up a loop, yarn over and draw through one loop on hook, yarn over and draw through 2 loops on hook.
Fdc (Foundation double crochet)
1.

Ch 3 (counts as first st), yarn over, insert hook in 3rd ch from hook and draw up a loop; yarn over and draw through one loop on hook (the "chain"); (yarn over and draw through 2 loops on hook) twice (the "double crochet").
2.

*Yarn over, insert hook into the "chain" of the double crochet just made and draw up a loop; yarn over and draw through one loop on hook (the "chain"), (yarn over and draw through 2 loops on hook) twice (the "double crochet"); repeat from * the total number of times indicated.
FPTR (front post treble crochet) Yo twice, insert hook from front to back then to front, going around the post of st, draw up a loop, (yo and draw through 2 loops on hook) 3 times.

Skip st behind the FPTR.
long-sc Insert hook into st 2 rows below (1 row below row into which you usually work).

Yarn over and draw up a loop to the height of the current row.

Yarn over and draw through both loops on hook.

Skip the st in the row into which you usually work.
sc2tog (sc 2 sts together) Insert hook into st and draw up a loop.

Insert hook into next st and draw up a loop.

Yarn over, draw through all 3 loops on hook.

NOTES:
1.

Socks are worked from the cuff downwards.

The cuff and leg are worked in rnds down to+ the heel.

The heel is then worked back and forth in rows.

After the heel is complete, work resumes in the rnd to work the foot and toe.

2.

Foundation double crochet (FPdc) creates a foundation ch and a double crochet all in one.

It creates a more flexible first round, allowing the cuff to fit more comfortably.

If you prefer to use a traditional foundation ch, beg as follows:
With smaller hook, ch 46 (50, 58, 64).
Rnd 1: Dc in 4th ch from hook (beg ch counts as first dc) and in each ch across; join with sl st in top of beg ch - 44 (48, 56, 62) dc at the end of this rnd.
3.

To change color in the join of a rnd, insert hook in first st of rnd, yarn over with new color and draw through all loops on hook to complete join.

Fasten off old color, proceed with new color.


INSTRUCTIONS



SOCK (make 2)
Cuff
Rnd 1: With smaller hook and B, ch 3 (counts as first dc here and throughout) and work 43 (47, 55, 61) more Fdc; join with sl st in top of beg ch - 44 (48, 56, 62) dc at the end of this rnd.
Note: Use the beginning tail to sew the edges of the first rnd together.
Rnd 2: Ch 3, FPTR around next dc, *dc in next dc, FPTR around next dc; rep from * around; join with sl st in top of beg ch - 22 (24, 28, 31) dc and 22 (24, 28, 31) FPTR at the end of this rnd.
Rnds 3 and 4: Ch 3, FPTR around next FPTR, *dc in next dc, FPTR around next FPTR; rep from * around; join with sl st in top of beg ch.
Rnd 5: Change to larger hook, ch 1, sc in same st as join, sc in each st around; join with sl st in first sc and change to A.
Leg
Rnd 6: Ch 1, Esc in same st as join and in each sc around; DO NOT join.
Notes: Work now proceeds in continuous rnds.

Do not join at the end of rnds, do not turn, and do not work a beginning ch at the beginning of rnds.

Place a marker to indicate beg of rnd.

Move marker up as work progresses.
Rnd 7: Esc in each st around.
Rep last rnd until piece measures 7 in.

(18 cm) from beg.
Sl st in next st.

Fasten off.



Heel Flap
Note: Work now proceeds back and forth in rows over about one-half of the sts to form the heel.

Remove beg of rnd marker.
Row 1 (RS): Join B with sc in same st as last sl st made; sc in next 22 (24, 28, 30) sts; leave rem sts unworked for front of leg - 23 (25, 29, 31) sc at the end of this row.
Row 2: Ch 1, turn, sc in each sc across.
Row 3: Ch 1, turn, sc in next sc, *long-sc in next sc 2 rows below, sc in next sc; rep from * across.
Rep Rows 2 and 3 until heel flap measures 2 3/4 in.

(7 cm); end with a WS row (Row 2).

Note: End with a WS row means that the last row you work should be a WS row, and the next row that you are ready to work will be a RS row.



Turn Heel
Row 1 (RS): Ch 1, turn, sc in next sc, (sc2tog) twice, sc in each sc to last 5 sc, (sc2tog) twice, sc in last sc - 19 (21, 25, 27) sc at the end of this row.
Row 2: Ch 1, turn, sc in each st across.
Rows 3 and 4: Rep Rows 1 and 2 - 15 (17, 21, 23) sc at the end of Row 3.
Row 5: Ch 1, turn, sc in next sc, sc2tog, sc in each sc to last 3 sc, sc2tog, sc in last sc; change to A in last st - 13 (15, 19, 21) sc at the end of this row.



Gusset
Note: Sts are now worked down the side of the heel flap, across the front of leg sts, and up the opposite side of the heel flap.

Markers are placed to indicate locations to decrease for gussets.
Set-Up Row (RS): Do not turn, working from RS, work 15 sc evenly spaced in ends of rows across side of heel flap, place marker in last sc made (for gusset), Esc in 21 (23, 27, 31) front leg sts (previously unworked); work 15 sc evenly spaced in ends of rows across opposite side of heel flap, place marker in first sc of last 15 sc made (for gusset) - 51 (53, 57, 61) sts worked in this row (this count does not include the sts in the last row of the heel flap/turn).
Note: Work now proceeds in continuous rnds.

Do not join rnds from this point forward.

Place marker for beg of rnd.

Move beg of rnd marker up as each rnd is completed.

Tip: Use different colored marker for beg of rnd to distinguish it from the gusset markers.
Rnd 2 (RS): Esc in each st to 2 sts before first gusset marker, sc2tog, Esc in each st to next gusset marker, Esc in marked st, sc2tog, Esc in each st to end of rnd - 62 (66, 74, 80) sts.
Rep last rnd until 44 (48, 56, 62) sts rem.
Remove gusset markers.



Foot
Rnd 1: Esc in each st around.
Rep last rnd until foot measures 2 in.

(5 cm) less than distance to longest toe.



Flatten foot, making sure that the heel is centered to the back.

Place a marker on each side edge.



Toe
Remove beg of rnd marker.

Esc in each st to next side marker.

This is now the new beg of rnd.



Rnd 1: Sc in each st around - 44 (48, 56, 62) sc.
Rnd 2: Sc in marked (beg of rnd) sc, sc2tog, sc in each sc to 2 sc before next marker, sc2tog, sc in marked sc, sc2tog, sc in each sc to 2 sc before beg of rnd marker, sc2tog - 40 (44, 52, 58) sc at the end of this rnd.
Rnd 3: Sc in each sc around.
Rep last 2 rnds until 16 (20, 28, 34) sc rem.
Sl st in next sc.

Fasten off.

Remove markers.



FINISHING
Turn Sock inside out, whipstitch toe closed.

Weave in ends.

ABBREVIATIONS / REFERENCES
ch(s) = chain(s)
dc = double crochet
rep = repeat(s)(ing)
sc = single crochet
sl st = slip stitch
st(s) = stitch(es)
ch(s) = chain(s)
ch-space = space previously made
dc = double crochet
rem = remain(s)(ing)
rep = repeat(s)(ing)
rnd(s) = round(s)
RS = right side
sc = single crochet
sl st = slip stitch
sp(s) = space(s)
st(s) = stitch(es)
WS = wrong side


Every effort has been made to have the knitting and crochet instructions accurate and complete. We cannot be responsible for variance of individual knitters and crocheters, human errors, or typographical mistakes.
We want your project to be a success! If you need help with this or any other Lion Brand pattern, e-mail support is available 7 days per week by mailing support@lionbrand.com.

For over a thousand free patterns available in versions for the vision-impaired, visit our website http://www.LionBrand.com

To order, visit our website http://www.e-yarn.com or call: (800) 258-9276 any time!

Copyright ©1998-2011 Lion Brand Yarn Company, all rights reserved. No pattern or other material may be reproduced -- mechanically, electronically, or by any other means, including photocopying -- without written permission of Lion Brand Yarn Company.

Click here for Non-Braille display: View With Images