Free Loom-Woven Pattern from Lion Brand Yarn, formatted for input to refreshable Braille displays or Braille software
Loom Woven And Knit Bag
Lion Brand® Vanna's Choice®
Pattern Number: L0358
Make this bag with both knitting and weaving techniques with the Martha Stewart Crafts Lion Brand Yarn Knit & Weave Loom Kit.
SKILL LEVEL: Easy (Level 2)
SIZE: One Size
About 14 x 14 in. (35.5 x 35.5 cm), not including straps
860-144 Vanna's Choice Yarn: Magenta
Rich, deep purple-pink
Quantity needed: 1 Skeins
Estimated Price: $ 4.39
860-145 Vanna's Choice Yarn: Eggplant
Quantity needed: 1 Skeins
Estimated Price: $ 4.39
Martha Stewart Crafts™ Knit & Weave Loom Kit
Quantity needed: 1
Estimated Price: $ 45.00
Rectangle = 5 x 16 in. (12.5 x 40.5 cm)
EXACT GAUGE IS NOT ESSENTIAL TO THIS PROJECT. When you match the gauge in a pattern, your project will be the size specified in the pattern and the materials specified in the pattern will be sufficient. The needle or hook size called for in the pattern is based on what the designer used, but it is not unusual for gauge to vary from person to person. If it takes you fewer stitches and rows to make your swatch, try using a smaller size hook or needles; if more stitches and rows, try a larger size hook or needles.
Making a Gauge Swatch
Exact gauges is not imporant to this project.
1. The instructions provided in the loom manual for casting on are the same for both flat knitting and knitting in the round (when you make a tube).
These instructions are listed under the heading of SINGLE KNITTING.
2. Always knit in a clockwise direction around loom for single knitting in the round.
3. Contrast color peg is used to mark the beginning of each round for the Straps.
4. For Edging, loom is kept in the oval set-up to make it easier to hold.
Knit only on the indicated stitches for Edging.
5. Once you've cast on for the Edging, work back and forth in rows.
6. Four Rectangles are woven, then sewn together to make Bag.
Straps are knitted separately.
RECTANGLES (make 4):
Use the following pieces: (2) 36-hole pieces, (4) 12-hole pieces, (4) corner pieces.
Connect pieces to form a rectangle as follows: 36-hole piece > 12-hole piece > corner piece > 12-hole piece > corner piece > 36-hole piece > 12-hole piece > corner piece > 12-hole piece > corner piece.
Insert a small peg into every hole along each 36-hole piece, 12-hole piece, and corner piece around - 144 small working pegs placed (Use 17 for warp and 55 for weft).
Insert one contrast color small peg in upper right corner for slip knot.
Follow loom manual instructions on WEAVING for how to set up the warp, weave the weft, and remove weaving from the loom.
Holding Loom vertically, set up the warp around 17 pegs on top and 17 pegs on bottom of loom using A.
Use B for weft.
STRAPS AND EDGING
Use the following pieces: (2) 28-hole semi-circle pieces, (2) 36-hole pieces.
Connect pieces to form an oval as follows: 28-hole semi-circle piece > 36-hole piece > 28-hole semi-circle piece > 36-hole piece.
Straps (make 2)
Insert one small contrast color peg anywhere along loom set-up to mark beginning of round, then insert a small peg into every remaining hole along each 28-hole semi-circle piece and each 36-hole piece - 128 small working pegs placed.
Following loom manual instructions for knitting in the round.
With B and beginning at contrast color peg, cast onto all working pegs.
Knit 4 rounds
Edging (make 2)
Insert 39 small pegs into 39 consecutive holes anywhere on loom.
Insert one contrast color peg into hole on right side of set-up - 40 working pegs placed.
Follow loom manual instructions on SINGLE KNITTING for how to cast on, knit, and bind off.
With B, cast onto all working pegs.
Knit 4 rows.
Note: Use yarn needle supplied with loom and B to sew pieces together.
Following Diagram 1, pin one safety pin for marker A and one for marker B on each Rectangle.
Following Diagram 2, sew Rectangles into 2 pairs.
Following Diagram 3, sew pairs of Rectangles together.
Following Diagram 4, bring marker A of one Rectangle to meet marker B of adjoining Rectangle.
Sew from markers down to base of Bag.
Repeat with remaining Rectangles, leaving markers placed in each Rectangle as shown in Diagram 5.
Following Diagram 6, sew one Strap between A markers along top edge of Bag.
Repeat with second Strap between A markers on opposite side of Bag.
Following Diagram 7, sew one Edging piece between Straps.
Repeat with second Edging piece.
Remove all markers from Bag.
Following Diagram 8, sew ends of Edging to sides of Straps.
Using yarn needle provided with loom, weave in yarn ends to wrong side of Bag.
Every effort has been made to have the knitting and crochet instructions accurate and complete. We cannot be responsible for variance of individual knitters and crocheters, human errors, or typographical mistakes.
We want your project to be a success! If you need help with this or any other Lion Brand pattern, e-mail support is available 7 days per week by mailing email@example.com.
For over a thousand free patterns available in versions for the vision-impaired, visit our website http://www.LionBrand.com
To order, visit our website http://www.e-yarn.com or call: (800) 258-9276 any time!
Copyright ©1998-2011 Lion Brand Yarn Company, all rights reserved.
No pattern or other material may be reproduced -- mechanically, electronically, or by any other means, including photocopying -- without written permission of Lion Brand Yarn Company.
Click here for Non-Braille display: View With Images