Free Crochet Pattern from Lion Brand Yarn, formatted for input to refreshable Braille displays or Braille software
Classic Sleeveless Top
Lion Brand® Vanna's Glamour®
Pattern Number: L10287 Classic design elements like the scoop neck and sleeveless shoulders of this top make it a must-crochet project. Vanna White and her kitten Stella are pictured here enjoying the soft texture of this colorful Vanna's Glamour top.

SKILL LEVEL:  Intermediate + (Level 4)
SIZE: Small, Medium, Large, 1X, 2X
Finished Bust 32 (35, 38, 41, 44) in. (81.5 (89, 96.5, 104, 112) cm) Finished Length 20 1/2 (20 1/2, 21, 21, 21 1/2) in. (52 (52, 53.5, 53.5, 54.5) cm)
Note: Pattern is written for smallest size with changes for larger sizes in parentheses. When only one number is given, it applies to all sizes. To follow pattern more easily, circle all numbers pertaining to your size before beginning.

CORRECTIONS: None

MATERIALS

861-186 Vanna's Glamour Yarn: Bronze

Amber orange with orange sparkle


Quantity needed: 4 Skeins
Estimated Price: $ 18.76
Alternative Quantity: 4, 5, 5, 6

Lion Brand Crochet Hook - Size G-6 (4 mm)
Quantity needed: 1
Estimated Price: $ 2.45


Lion Brand Large-Eye Blunt Needles (Set of 6)
Quantity needed: 1
Estimated Price: $ 3.59

GAUGE:
22 sts + 21 rows = 4 in. (10 cm) in Mesh st. When you match the gauge in a pattern, your project will be the size specified in the pattern and the materials specified in the pattern will be sufficient. The needle or hook size called for in the pattern is based on what the designer used, but it is not unusual for gauge to vary from person to person. If it takes you fewer stitches and rows to make your swatch, try using a smaller size hook or needles; if more stitches and rows, try a larger size hook or needles. Making a Gauge Swatch
Exact gauges is not imporant to this project.

STITCH EXPLANATION:
sc2tog (sc decrease) Insert hook into st and draw up a loop.

Insert hook into next st and draw up a loop.

Yarn over, draw through all 3 loops on hook - 1 st decreased.



PATTERN STITCH
Mesh Stitch (multiple of 2 sts + 1)
Row 1: Ch 1, turn, sc in first sc, *ch 1, sk next ch-1 sp, sc in next sc; rep from * to end of row.
Rep Row 1 for Mesh st pattern.

NOTES:
1. Front and Back are worked separately and, except for neck shaping, are identical.
2. Front and Back are worked from lower edge upwards.

Decreases are worked for waist shaping and increases are worked for bust shaping.
3. Mesh st is reversible, so either side of your work can be the right side.

As you work each piece, decide which side you would like for the right side, and mark that side with a pin or scrap of yarn.
4. When you see 'work even' in the instructions, this means to continue in the pattern st you have established without changing the st count by increasing or decreasing.


INSTRUCTIONS
BACK
Ch 90 (98, 106, 114, 122) loosely.
Row 1 (RS): Sc in 2nd ch from hook, *ch 1, sk next ch, sc in next ch; rep from * to end of row - 89 (97, 105, 113, 121) sts: 45 (49, 53, 57, 61) sc and 44 (48, 52, 56, 60) ch-1 sps at the end of this row.
Rows 2 and 3: Work even in Mesh st for 2 rows.



Shape Waist
Note: Decreases are worked to shape the waist.
The decreases begin lower than your actual waist.
Row 4 (Decrease Row): Ch 1, turn, sc in first sc, sk next ch-1 sp (do NOT ch 1), sc in next sc, *ch 1, sk next ch-1 sp, sc in next sc; rep from * to last ch-1 sp, sk last ch-1 sp (do NOT ch 1), sc in last sc - 87 (95, 103, 111, 119) sts: 45 (49, 53, 57, 61) sc and 42 (46, 50, 54, 58) ch-1 sps at the end of this row.
Rows 5 and 6: Ch 1, turn, sc in first 2 sc, *ch 1, sk next ch-1 sp, sc in next sc; rep from * to last sc, sc in last sc.
Row 7 (Decrease Row): Ch 1, turn, sc2tog, *ch 1, sk next ch-1 sp, sc in next sc; repeat from * to last ch-1 sp, ch 1, sk last ch-1 sp, sc2tog - 85 (93, 101, 109, 117) sts: 43 (47, 51, 55, 59) sc and 42 (46, 50, 54, 58) ch-1 sps at the end of this row.
Rows 8 and 9: Work even in Mesh st for 2 rows.
Rows 10-21: Rep Rows 4-9 twice more - 77 (85, 93, 101, 109) sts: 39 (43, 47, 51, 55) sc and 38 (42, 46, 50, 54) ch-1 sps when all decreases have been completed.
Rows 22 and 23: Work in Mesh st for 2 rows.



Shape Bust
Note: Increases are worked to shape the bust.
The increases begin lower than your actual bust.
Row 24 (Increase Row): Ch 1, turn, 2 sc in first sc, *ch 1, sk next ch-1 sp, sc in next sc; rep from * to last ch-1 sp, ch 1, sk last ch-1 sp, 2 sc in last sc - 79 (87, 95, 103, 111) sts: 41 (45, 49, 53, 57) sc and 38 (42, 46, 50, 54) ch-1 sps at the end of this row.
Rows 25 and 26: Ch 1, turn, sc in first 2 sc, *ch 1, sk next ch-1 sp, sc in next sc; rep from * to last sc, sc in last sc.
Row 27 (Increase Row): Ch 1, turn, sc in first sc, ch 1, sc in next sc, *ch 1, sk next ch-1 sp, sc in next sc; rep from * to last sc, ch 1, sc in last sc - 81 (89, 97, 105, 113) sts: 41 (45, 49, 53, 57) sc and 40 (44, 48, 52, 56) ch-1 sps at the end of this row.
Rows 28 and 29: Work even in Mesh st for 2 rows.
Rows 30-41: Rep Rows Rows 24-29 twice more - 89 (97, 105, 113, 121) sts: 45 (49, 53, 57, 61) sc and 44 (48, 52, 56, 60) ch-1 sps when all increases have been completed.
Rows 42-65: Work in Mesh st for 24 rows.



Shape Armholes
Note: Beginning in this section, instructions are divided by size.
Follow the instructions for the specific size that you are making.
For ALL sizes, the instructions note that you should end with a RS row.

This means that the last row you work should be a RS row.



Size S ONLY
Row 66: Turn, sl st over first 3 sts, ch 1, sc in next ch-1 sp, sc in next sc, *ch 1, sk next ch-1 sp, sc in next sc; rep from * to last 4 sts, sc in next ch-1 sp; leave rem sts unworked - 83 sts: 43 sc and 40 ch-1 sps at the end of this row.
Row 67: Ch 1, turn, sc in first 2 sc, *ch 1, sk next ch-1 sp, sc in next sc; rep from * to last sc, sc in last sc.
Row 68 (Decrease Row B): Ch 1, turn, sc2tog, *ch 1, sk next ch-1 sp, sc in next sc; repeat from * to last ch-1 sp, ch 1, sk last ch-1 sp, sc2tog - 81 sts: 41 sc and 40 ch-1 sps.
Row 69: Work even in Mesh st for 1 row.
Row 70 (Decrease Row A): Ch 1, turn, sc in first sc, sk next ch-1 sp, sc in next sc, *ch 1, sk next ch-1 sp, sc in next sc; rep from * to last ch-1 sp, sk last ch-1 sp, sc in last sc - 79 sts: 41 sc and 38 ch-1 sps.
Row 71: Ch 1, turn, sc in first 2 sc, *ch 1, sk next ch-1 sp, sc in next sc; rep from * to last sc, sc in last sc.
Rep last row until armholes measure 7 in.

(18 cm), end with a RS row.



Sizes M (1X) ONLY
Row 66: Turn, sl st over first 4 (6) sts, ch 1, sc in next sc, *ch 1, sk next ch-1 sp, sc in next sc; rep from * to last 4 (6) sts; leave rem sts unworked - 89 (101) sts: 45 (51) sc and 44 (50) ch-1 sps at the end of this row.
Row 67: Work even in Mesh st for 1 row.
Row 68 (Decrease Row A): Ch 1, turn, sc in first sc, sk next ch-1 sp, sc in next sc, *ch 1, sk next ch-1 sp, sc in next sc; rep from * to last ch-1 sp, sk last ch-1 sp, sc in last sc - 87 (99) sts: 45 (51) sc and 42 (48) ch-1 sps at the end of this row.
Row 69: Ch 1, turn, sc in first 2 sc, *ch 1, sk next ch-1 sp, sc in next sc; rep from * to last sc, sc in last sc.
Row 70 (Decrease Row B): Ch 1, turn, sc2tog, *ch 1, sk next ch-1 sp, sc in next sc; repeat from * to last ch-1 sp, ch 1, sk last ch-1 sp, sc2tog - 85 (97) sts: 43 (49) sc and 42 (48) ch-1 sps at the end of this row.
Rep Rows 67-70 1 (3) more times - 81 (85) sts: 41 (43) sc and 40 (42) ch-1 sps.
Work even in Mesh st until armholes measure 7 1/2 (8 1/2) in.

(19 (21.5) cm), end with a RS row.



Size L ONLY
Row 66: Turn, sl st over first 5 sts, ch 1, sc in next ch-1 sp, sc in next sc, *ch 1, sk next ch-1 sp, sc in next sc; rep from * to last 6sts, sc in next ch-1 sp; leave rem sts unworked - 95 sts: 49 sc and 46 ch-1 sps at the end of this row.
Row 67: Ch 1, turn, sc in first 2 sc, *ch 1, sk next ch-1 sp, sc in next sc; rep from * to last sc, sc in last sc.
Row 68 (Decrease Row B): Ch 1, turn, sc2tog, *ch 1, sk next ch-1 sp, sc in next sc; repeat from * to last ch-1 sp, ch 1, sk last ch-1 sp, sc2tog - 93 sts: 47 sc and 46 ch-1 sps.
Row 69: Work even in Mesh st for 1 row.
Row 70 (Decrease Row A): Ch 1, turn, sc in first sc, sk next ch-1 sp, sc in next sc, *ch 1, sk next ch-1 sp, sc in next sc; rep from * to last ch-1 sp, sk last ch-1 sp, sc in last sc - 91 sts: 47 sc and 44 ch-1 sps.
Rows 71-78: Rep Rows 67-70 twice more - 83 sts: 43 sc and 40 ch-1 sps when all dec have been completed.
Row 79: Ch 1, turn, sc in first 2 sc, *ch 1, sk next ch-1 sp, sc in next sc; rep from * to last sc, sc in last sc.
Rep last row until armholes measure 8 in.

(20.5 cm), end with a RS row.



Size 2X ONLY
Row 66: Turn, sl st over first 8 sts, ch 1, sc in next sc, *ch 1, sk next ch-1 sp, sc in next sc; rep from * to last 8 sts; leave rem sts unworked - 105 sts: 53 sc and 52 ch-1 sps at the end of this row.
Row 67: Work even in Mesh st for 1 row.
Row 68 (Decrease Row A): Ch 1, turn, sc in first sc, sk next ch-1 sp, sc in next sc, *ch 1, sk next ch-1 sp, sc in next sc; rep from * to last ch-1 sp, sk last ch-1 sp, sc in last sc - 103 sts: 53 sc and 50 ch-1 sps at the end of this row.
Row 69: Ch 1, turn, sc in first 2 sc, *ch 1, sk next ch-1 sp, sc in next sc; rep from * to last sc, sc in last sc.
Row 70 (Decrease Row B): Ch 1, turn, sc2tog, *ch 1, sk next ch-1 sp, sc in next sc; repeat from * to last ch-1 sp, ch 1, sk last ch-1 sp, sc2tog - 101 sts: 51 sc and 50 ch-1 sps at the end of this row.
Rows 71-82: Rep Rows 67-70 3 more times - 89 sts: 45 sc and 44 ch-1 sps when all dec have been completed.
Rows 83 and 84: Rep Rows 67 and 68 once more - 87 sts: 45 sc and 42 ch-1 sps.
Next Row: Ch 1, turn, sc in first 2 sc, *ch 1, sk next ch-1 sp, sc in next sc; rep from * to last sc, sc in last sc.
Rep last row until armholes measure 9 in.

(23 cm), end with a RS row.



ALL SIZES
Shape Neck and First Shoulder
NOTES
1. In all of the remaining sections you will be instructed to work in Mesh st "as established", this means that you should maintain the Mesh st pattern as it has been worked up to this point.

There are 2 important properties of the Mesh st pattern that you will need to maintain.
a. Each row of the Mesh st pattern beg and ends with at least one sc.
b. In each row of the pattern, sc sts are worked into sc sts, and a ch-1 is worked over each ch-1 sp (and the ch-1 sp is skipped).
2. To decrease over a ch-1 sp and an sc, sk the ch-1 sp (working an sc in each sc on either side of the ch-1 sp).

To decrease over 2 sc sts, work an sc2tog.
3. To increase, work 2 sc into one st.



Row 1: Work in Mesh st as established over first 21 (21, 22, 22, 23) sts; leave rem sts unworked for neck and 2nd shoulder - 21 (21, 22, 22, 23) sts at the end of this row.
Row 2: Ch 1, turn, decrease 1 st, work in Mesh st as established to last 3 (3, 4, 4, 4) sts; leave rem sts unworked - 17 (17, 17, 17, 18) sts at the end of this row.
Row 3: Turn, sl st over first 3 sts, ch 1, work in Mesh st as established to last 2 sts, decrease 1 st - 13 (13, 13, 13, 14) sts at the end of this row.
Row 4: Work in Mesh st as established to last 3 (3, 3, 3, 4) sts; leave rem sts unworked - 10 sts at the end of this row.
Row 5: Turn, sl st over first 3 sts, work in Mesh st as established to end of row - 7 sts at the end of this row.
Row 6: Work in Mesh st as established to last 3 sts; leave last 3 sts unworked - 4 sts at the end of this row.
Row 7: Work in Mesh st as established to end of row.
Fasten off.



Shape Neck and Second Shoulder
Sk next 37 (39, 39, 41, 41) unworked sts following first shoulder, join yarn with sl st in next unworked st.
Row 1: Ch 1, sc in same st as join, work in Mesh st as established to end of row - 21 (21, 22, 22, 23) sts at the end of this row.
Row 2: Turn, sl st over first 3 (3, 4, 4, 4) sts, ch 1, work in Mesh st as established to last 2 sts, decrease 1 st - 17 (17, 17, 17, 18) sts at the end of this row.
Row 3: Ch 1, turn, decrease 1 st, Work in Mesh st as established to last 3 sts; leave last 3 sts unworked - 13 (13, 13, 13, 14) sts at the end of this row.
Row 4: Turn, sl st over first 3 (3, 3, 3, 4) sts, work in Mesh st as established to end of row - 10 sts at the end of this row.
Row 5: Work in Mesh st as established to last 3 sts; leave last 3 sts unworked - 7 sts at the end of this row.
Row 6: Turn, sl st over first 3 sts, ch 1, work in Mesh st as established to end of row - 4 sts at the end of this row.
Row 7: Work in Mesh st as established to end of row.
Fasten off.
FRONT
Work same as back until armholes measure 3 (3 1/2, 4, 4 1/2, 5) in.

(7.5 (9, 10, 11.5, 12.5) cm), end with WS row - 79 (81, 83, 85, 87) sts when all armhole shaping is complete.



Shape Neck and First Shoulder
Row 1 (RS): Work in Mesh st as established over first 31 (31, 32, 32, 33) sts; leave rem sts unworked for neck and 2nd shoulder - 31 (31, 32, 32, 33) sts at the end of this row.
Row 2: Turn, sl st over first 2 sts, ch 1, work in Mesh st as established to end of row - 29 (29, 30, 30, 31) sts at the end of this row.
Row 3: Work in Mesh st as established to last 2 sts; leave rem sts unworked - 27 (27, 28, 28, 29) sts at the end of this row.
Rows 4 and 5: Rep last 2 rows - 23 (23, 24, 24, 25) sts rem at the end of Row 5.
Row 6: Work in Mesh st as established to end of row.
Row 7: Work in Mesh st as established to last 2 sts, decrease 1 st - 22 (22, 23, 23, 24) sts at the end of this row.
Rows 8 and 9: Rep last 2 rows - 21 (21, 22, 22, 23) sts rem at the end of Row 9.
Rows 10-12: Work in Mesh st as established to end of row.
Row 13: Rep Row 7 - 20 (20, 21, 21, 22) sts at the end of this row.
Rows 14-17: Rep last 4 rows - 19 (19, 20, 20, 21) sts at the end of Row 17.
Row 18: Work in Mesh st as established to end of row.
Rep last row until armhole measures 7 (7 1/2, 8, 8 1/2, 9) in.

(18 (19, 20.5, 21.5, 23) cm), end with a WS row.
Next Row: Turn, sl st over first 3 (3, 4, 4, 4) sts, ch 1, work in Mesh st as established to end of row - 16 (16, 16, 16, 17) sts at the end of this row.
Next Row: Work in Mesh st as established to last 3 sts; leave last 3 sts unworked - 13 (13, 13, 13, 14) sts at the end of this row.
Next Row: Turn, sl st over first 3 (3, 3, 3, 4) sts, ch 1, work in Mesh st as established to end of row - 10 sts at the end of this row.
Next Row: Work in Mesh st as established to last 3 sts; leave rem sts unworked - 7 sts sts at the end of this row.
Next Row: Turn, sl st over first 3 sts, ch 1, work in Mesh st as established to end of row - 4 sts at the end of this row.
Last Row: Work in Mesh st as established to end of row.
Fasten off.



Shape Neck and Second Shoulder
With RS facing, sk next 17 (19, 19, 21, 21) unworked sts following first shoulder, join yarn with sl st in next unworked st.
Row 1 (RS): Ch 1, sc in same st as join, work in Mesh st as established to end of row - 31 (31, 32, 32, 33) sts at the end of this row.
Row 2: Work in Mesh st as established to last 2 sts; leave rem sts unworked - 29 (29, 30, 30, 31) sts at the end of this row.
Row 3: Turn, sl st over first 2 sts, ch 1, work in Mesh st as established to end of row - 27 (27, 28, 28, 29) sts at the end of this row.
Rows 4 and 5: Rep Rows 2 and 3 - 23 (23, 24, 24, 25) sts rem.
Row 6: Work in Mesh st as established to end of row.
Row 7: Ch 1, turn, decrease 1 st, work in Mesh st as established to end of row - 22 (22, 23, 23, 24) sts at the end of this row.
Rows 8 and 9: Rep last 2 rows - 21 (21, 22, 22, 23) sts rem.
Rows 10-12: Work in Mesh st as established to end of row.
Row 13: Rep Row 7 - 20 (20, 21, 21, 22) sts at the end of this row.
Rows 14-16: Work in Mesh st as established to end of row.
Row 17: Rep Row 7 - 19 (19, 20, 20, 21) sts at the end of this row.
Row 18: Work in Mesh st as established to end of row.
Rep last row until armhole measures 7 (7 1/2, 8, 8 1/2, 9) in.

(18 (19, 20.5, 21.5, 23) cm), end with a WS row.
Next Row: Work in Mesh st as established to last 3 (3, 4, 4, 4) sts; leave rem sts unworked - 16 (16, 16, 16, 17) sts at the end of this row.
Next Row: Turn, sl st over first 3 sts, ch 1, work in Mesh st as established to end of row - 13 (13, 13, 13, 14) sts at the end of this row.
Next Row: Work in Mesh st as established to last 3 (3, 3, 3, 4) sts; leave rem sts unworked - 10 sts at the end of this row.
Next Row: Turn, sl st over first 3 sts, ch 1, work in Mesh st as established to end of row - 7 sts at the end of this row.
Next Row: Work in Mesh st as established to last 3 sts; leave rem sts unworked - 4 sts at the end of this row.
Last Row: Work in Mesh st as established to end of row.
Fasten off.

FINISHING
Sew side and shoulder seams.
Armhole Trim
With RS facing, join yarn with sl st in seam at either underarm.
Rnd 1 (RS): Ch 1, work an even number of sc evenly spaced around armhole edge; join with sl st in first sc.
Rnd 2: Ch 1, turn, sc in same st as join, ch 1, sk next sc, *sc in next sc, ch 1, sk next sc; rep from * around; join with sl st in first sc.
Fasten off.
Rep trim around second armhole.
Neck Trim
With RS facing, join yarn with sl st in shoulder seam at neck.

Work trim same as armhole trim around neck edge.
Lower Edge Trim
With WS facing, join yarn with sl st on lower edge at either side seam.
Rnd 1 (WS): Working across opposite side of foundation ch, ch 1, sc in same st as join, ch 1, sk next ch, *sc in next ch, ch 1, sk next ch; rep from * around, skipping 1 ch more if needed to end evenly; join with sl st in first sc.

Fasten off.
Weave in ends.

ABBREVIATIONS / REFERENCES
beg = begin(s)(ning)
ch(s) = chain(s)
ch-space = space previously made
rep = repeat(s)(ing)
rnd(s) = round(s)
RS = right side
sc = single crochet
sk = skip
st(s) = stitch(es)
WS = wrong side


Every effort has been made to have the knitting and crochet instructions accurate and complete. We cannot be responsible for variance of individual knitters and crocheters, human errors, or typographical mistakes.
We want your project to be a success! If you need help with this or any other Lion Brand pattern, e-mail support is available 7 days per week by mailing support@lionbrand.com.

For over a thousand free patterns available in versions for the vision-impaired, visit our website http://www.LionBrand.com

To order, visit our website http://www.e-yarn.com or call: (800) 258-9276 any time!

Copyright ©1998-2011 Lion Brand Yarn Company, all rights reserved. No pattern or other material may be reproduced -- mechanically, electronically, or by any other means, including photocopying -- without written permission of Lion Brand Yarn Company.

Click here for Non-Braille display: View With Images