Free Knitting Pattern from Lion Brand Yarn, formatted for input to refreshable Braille displays or Braille software
Fitted Cable Pullover
Lion Brand® Vanna's Glamour®
Pattern Number: L32179

Pair this knit turtleneck sweater with a simple trousers to make a outfit perfect for an internship interview or staff luncheon. Featuring a center cable design and a ribbed collar and cuffs, this garment is sophisticated in its details.



SKILL LEVEL:  Experienced (Level 5)
SIZE: Small, Medium, Large, 1X, 2X, 3X

Finished Bust 34 (38, 42, 46, 50, 54) in. (86.5 (96.5, 106.5, 117, 127, 137) cm)
Finished Length 24 (24 1/2, 25, 25 1/2, 26, 26 1/2) in. (61(62, 63.5, 65, 66, 67.5) cm)


Note: Pattern is written for smallest size with changes for larger sizes in parentheses. When only one number is given, it applies to all sizes. To follow pattern more easily, circle all numbers pertaining to your size before beginning.

CORRECTIONS: None

MATERIALS

861-150 Vanna's Glamour® Yarn: Platinum

Medium silver gray with metallic silver


Quantity needed: 9 Skeins
Estimated Price:
Alternative Quantity: 11, 12, 13, 15, 16

Lion Brand Knitting Needles - Size 7 [4.5 mm]
Quantity needed: 1
Estimated Price:


Lion Brand Double-Pointed Needles - Size 7
Quantity needed: 1
Estimated Price:


Boye Aluminum Circular Knitting Needles 16 inches Size 8
Quantity needed: 1
Estimated Price:


Lion Brand Stitch Holders
Quantity needed: 1
Estimated Price:


Lion Brand Split Ring Stitch Markers
Quantity needed: 1
Estimated Price:


Lion Brand Large-Eye Blunt Needles (Set of 6)
Quantity needed: 1
Estimated Price:

GAUGE:

17 sts + 25 rows = 4 in. (10 cm) in Rev St st (p on RS, k on WS) with smaller needles and 2 strands of yarn held together.


Exact gauges is not imporant to this project.

STITCH EXPLANATION:

kfb (knit in front and back) Knit next st without removing it from left needle, then k through back of same st – 1 st increased.
M1 (make 1) An increase worked by lifting the horizontal strand lying between needles and placing it onto left needle. Knit this new stitch through the back loop – 1 st increased.
M1P (make 1 st as if to purl) An increase worked by lifting the horizontal strand lying between the needles and placing it onto left needle. Purl this new stitch through the back loop – 1 st increased.
pfb (purl into front and back) Purl next st without removing it from left needle, then p through back of same st – 1 st increased.

SPECIAL TECHNIQUES
w&t (wrap and turn):

W&t is a technique used to ensure that a small hole doesn't form at the end of a short row. How you work a w&t depends on whether you are doing a KNIT stitch or a PURL st. Follow the specific instructions below to work a w&tK (a wrap and turn for a KNIT st) or a w&tP (wrap and turn for a PURL st).
w&tK (for KNIT)
1. Bring the yarn between the needles to the front of the work (the front is the side that is facing you). Take care not to wrap the yarn over a needle, this would create a new st.
2. Slip the next st from the left hand needle to the right hand needle as if to purl.
3. Turn the work. After turning, the yarn will be in the back of the work.
4. Bring the yarn between the needles to the front of the work.
5. Slip the first st on left needle as if to purl, back onto right needle. You will now have one stitch on the right needle with a wrap of yarn around the base of the st.
6. Bring the yarn between the needles to the back of the work and continue with the row.
7. When you encounter the wrapped st on the next row, lift the wrap with the tip of your right hand needle and work it tog with the wrapped st.
w&tP (for PURL)
1. Bring the yarn between the needles to the back of the work (the back is the side that is facing away from you). Take care not to wrap the yarn over a needle, this would create a new st.
2. Slip the next st from the left hand needle to the right hand needle as if to purl.
3. Turn work. After turning, the yarn will be in the front of the work.
4. Bring the yarn between the needles to the back of the work.
5. Slip the first st on left needle as if to purl, back onto right needle. You will now have one stitch on the right needle with a wrap of yarn around the base of the st.
6. Bring the yarn between the needles to the front of the work and continue with the row.
7. When you encounter the wrapped st on the next row, lift the wrap with the tip of your right hand needle and work it tog with the wrapped st.

PATTERN STITCHES
K1, p1 Rib (multiple of 2 sts + 1)
Row 1:
K1, *p1, k1; rep from * to end of row.
Row 2: K the knit sts and p the purl sts.
Rep Row 2 for K1, p1 Rib.

K1, p1 Rib worked in rnds (multiple of 2 sts)
Rnd 1:
*K1, p1; rep from * to end of rnd.
Rep Rnd 1 for K1, p1 Rib worked in rnds.



NOTES:

1. Pullover is worked in 4 pieces, Back, Front, and 2 Sleeves and with 2 strands of yarn held tog.
2. In this design, several shaping techniques will be worked AT THE SAME TIME. Read through all directions before beg and keep careful track of your rows.
3. Cable panels are worked by dividing cable sts in half and working each half separately with separate balls of yarn. Sts are increased and decreased on either side of Cable Panel sts to keep Cable Panel flat. Cable Panel sts are reversed to create the cable twist.
4. On Back and Front, you will be working a cable on the center sts between markers. The number of sts between the markers will inc and dec to shape the cable. The sts outside the markers will inc and dec to shape both the cable and the sides.
5. Front neck shaping is worked in short rows.
6. Collar is worked in the round on double pointed needles with sts picked up around Pullover neck.
7. End with a WS row means that the last row you work should be a WS row, and the next row that you are ready to work will be a RS row.
8. When you see "– 12 sts". in the instructions, this lets you know how many sts you will have at the end of that specific row.




INSTRUCTIONS
BACK With 2 strands of yarn held tog, cast on 63 (77, 85, 93, 101, 111) sts. Row 1 (RS): K14 (21, 25, 29, 33, 38), place marker (pm), (k1, p1) 17 times, k1, pm, k14 (21, 25, 29, 33, 38). Row 2: K14 (21, 25, 29, 33, 38), slip marker (sm), (p1, k1) 17 times, p1, sm, k14 (21, 25, 29, 33, 38). Row 3: P14 (21, 25, 29, 33, 38), sm, (k1, p1) 17 times, k1, sm, p14 (21, 25, 29, 33, 38). Keeping center 35 sts in ribbed pattern as established and side sts in Rev St st (p on RS, k on WS), work until piece measures 4 in. (10 cm) from beg, end with a WS row as the last row you work. First Cable Twist Dividing Row (RS): Purl to marker, M1p, sm, (k1, p1) 8 times, k1, pfb, join 2 more strands of yarn and with 2 new strands held tog, kfb, (p1, k1) 8 times, sm, M1p, purl to end of row – 67 (81, 89, 97, 105, 115) sts total; 34 (41, 45, 49, 53, 58) sts for first side; 33 (40, 44, 48, 52, 57) sts for second side. Next Row: Working both sides AT THE SAME TIME with separate balls of yarn, on first side, knit to marker, sm, (p1, k1) 9 times; on second side, p1, (k1, p1) 9 times, knit to end of row. Working both sides at the same time with separate balls of yarn, work 2 rows. Inc Row (RS): On first side, purl to marker, M1p, sm, (k1, p1) 9 times, k1; on second side, (p1, k1) 9 times, sm, M1p, purl to end of row – 69 (83, 91, 99, 107, 117) sts total; 35 (42, 46, 50, 54, 59) sts for first side; 34 (41, 45, 49, 53, 58) sts for second side. Working both sides at the same time with separate balls of yarn, work 3 rows, working increased sts in Rev St st. Rep last 4 rows 3 more times – 75 (89, 97, 105, 113, 123) sts total; 38 (45, 49, 53, 57, 62) sts for first side; 37 (44, 48, 52, 56, 61) sts for second side when all incs have been completed. Cable Row (RS): On first side, purl to marker, slip next 19 sts to a double pointed needle (dpn) and hold in back, with working yarn of first side, and working into Cable Panel sts of second side, k2tog, (p1, k1) 8 times; with yarn from second side and working into sts on dpn, p2tog (k1, p1) 8 times, k1, purl to end of second side – 73 (87, 95, 103, 111, 121) sts total; 36 (43, 47, 51, 55, 60) sts for first side; 37 (44, 48, 52, 56, 61) sts for second side. Work 1 row. Dec Row (RS): On first side, purl to 2 sts before marker, p2tog, sm, (k1, p1) 8 times, k1; on second side, (p1, k1) 9 times, sm, p2tog, purl to end of row – 71 (85, 93, 101, 109, 119) sts total; 35 (42, 46, 50, 54, 59) sts for first side; 36 (43, 47, 51, 55, 60) sts for second side. Work 3 rows. Rep last 4 rows 3 more times – 65 (79, 87, 95, 103, 113) sts total; 32 (39, 43, 47, 51, 56) sts for first side; 33 (40, 44, 48, 52, 57) sts for second side when all decs have been completed. Cut yarn from second side. Joining Row: With yarn from first side, work across both sides as follows: pfb, purl to marker, sm, k1, (p1, k1) 17 times, sm, purl to last st, pfb – 67 (81, 89, 97, 105, 115) sts. Next Row: K to marker, sm, (p1, k1) 17 times, p1, sm, k to end of row. Continuing in patterns as established, inc 1 st at each side edge every 6th row 3 more times, working new sts in Rev St st – 73 (87, 95, 103, 111, 121) sts when all incs have been completed. End with a WS row as the last row you work. Second Cable Twist Work same as for First Cable Twist until Inc Row has been worked 4 times, AT THE SAME TIME, inc 1 st each side edge every 6th row once more – 85 (99, 107, 115, 123, 133) sts total; 43 (50, 54, 58, 62, 67) sts for first side; 42 (49, 53, 57, 61, 66) sts for second side when all incs have been completed, end with a WS row as the last row you work. Piece should measure about 16 in. (40.5 cm) from beg. Shape Armhole Keeping sts between markers in Cable Twist and rem sts in Rev St st, bind off 4 (6, 8, 10, 12, 14) sts at beg of next 2 rows, then 2 (4, 6, 8, 8, 10) sts at beg of next 2 rows, then 1 st at beg of next 2 (6, 6, 6, 8, 8) rows. Continue to work as for First Cable Twist through Joining Row – 63 (65, 65, 65, 67, 69) sts rem. Keeping center sts in rib as established and rem sts in Rev St st, work until armholes measure 7 (7 1/2, 8, 8 1/2, 9, 9 1/2) in. (18 (19, 20.5, 21.5, 23, 24) cm, end with a WS row as your last row. Shape Shoulders Bind off 5 sts at beg of next 4 rows, then 4 (5, 5, 5, 6, 7) sts at beg of next 2 rows – 35 sts rem. Slip these rem 35 sts to a st holder for neck.
FRONT Work same as for Back until armholes measure 5 (5 1/2, 6, 6 1/2, 7, 7 1/2) in. (12.5 (14, 15, 16.5, 18, 19) cm, end with a WS row as the last row you work. Shape Neck Mark center 13 sts for neck. Short Row 1 (RS): Working in patterns as established, work to marked sts, work across center 13 sts in rib as established, w&tP, work across 13 sts, w&tK. Short Row 2: Working in pattern as established, work across 17 sts, picking up wraps, w&tP, work across 21 sts, w&tK. Short Row 3: Working in pattern as established, work across 24 sts, picking up wraps, w&tK, work across to 27 sts, w&tP. Short Row 4: Working in pattern as established, work across 29 sts, picking up wraps, w&tK, work across 31 sts, w&tP. Short Row 5: Working in pattern as established, work across 32 sts, picking up wraps, w&tP, work across 33 sts, w&tK. Short Row 5: Working in pattern as established, work across 34 sts, picking up wraps, w&tK, work across 35 sts, w&tP. Next Row (RS): Purl to marker, sm, join 2 more strands of yarn and work in rib to next marker, slip sts between markers to st holder for neck, purl to end of row – 14 (15, 15, 15, 16, 17) sts rem each side. Working both sides at same time with separate balls of yarn, work until armholes measure same as Back to shoulders, end with a WS row as your last row. Shape Shoulders Bind off 5 sts from each side edge twice, then 4 (5, 5, 5, 6, 7) sts from each side edge once.
SLEEVES (make 2) With 2 strands of yarn held tog, cast on 41 (47, 55, 59, 63, 69) sts. Work in K1, p1 rib for 1 3/4 in. (4.5 cm), end with WS as your last row. Beg with a RS (purl) row, work in Rev St st, inc 1 st each side every 6th row 2 times – 45 (51, 59, 63, 67, 73) sts when all incs have been completed. Work until piece measures 8 in. (20.5 cm) from beg, end with a WS row as the last row you work. Shape Cap Bind off 4 (5, 6, 7, 8, 9) sts at beg of next 2 rows, then 2 (3, 4, 4, 4, 4) sts at beg of next 2 rows – 33 (35, 39, 41, 43, 47) sts when all bind offs have been completed. Dec 1 st each side every other row 8 (9, 11, 12, 13, 15) times – 17 sts when all decs have been completed. Bind off 2 sts at beg of next 4 rows – 9 sts rem. Bind off.

FINISHING Sew shoulder seams. Collar From RS, with double pointed needles and 2 strands of yarn held tog, and keeping in K1, p1 rib, work across 35 sts from back neck st holder, pick up and k 9 sts evenly spaced along left front neck, work across 35 sts from front neck stitch holder, pick up and k 9 sts evenly spaced along right front neck – 88 sts. Divide sts evenly onto 4 dpns (22 sts on each needle). Place marker for beg of rnd and join by working the first st on the left hand needle with the working yarn from the right hand needle. Rnd 1: *K1, p1; rep from * around. Rep Rnd 1 until collar measures 4 in. (10 cm). Change to circular needle and rep Rnd 1 until collar measures 10 in. (25.5 cm). Inc Rnd 1: (K1, p1) 3 times, k1, M1, (p1, k1) 12 times, p1, M1, (k1, p1) 3 times, k1, M1, work to end of rnd, M1 – 92 sts. Next Rnd: K the knit and p the purl sts, working increased sts as k sts. Inc Rnd 2: (K1, p1) 3 times, k1, M1p, (k1, p1) 13 times, k1, M1p, (k1, p1) 3 times, k1, M1p, work to end of rnd, M1p – 96 sts. Rep Rnd 1 for 3 more rnds. Inc Rnd 3: (K1, p1) 3 times, k1, M1, (p1, k1) 14 times, p1, M1, (k1, p1) 3 times, k1, M1, work to end of rnd, M1 – 100 sts. Next Rnd: K the knit and p the purl sts, working increased sts as k sts. Inc Rnd 4: (K1, p1) 3 times, k1, M1p, (k1, p1) 15 times, k1, M1p, (k1, p1) 3 times, k1, M1p, work to end of rnd, M1p – 104 sts. Rep Rnd 1 for 3 more rnds. Inc Rnd 5: (K1, p1) 3 times, k1, M1, (p1, k1) 16 times, p1, M1, (k1, p1) 3 times, k1, M1, work to end of rnd, M1 – 108 sts. Next Rnd: K the knit and p the purl sts, working increased sts as k sts. Inc Rnd 6: (K1, p1) 3 times, k1, M1p, (k1, p1) 17 times, k1, M1p, (k1, p1) 3 times, k1, M1p, work to end of rnd, M1p – 112 sts. Next Rnd: *K1, p1; rep from * around. Rep last rnd 5 more times. Bind off.
Sew in Sleeves. Sew side and Sleeve seams. Weave in ends.

ABBREVIATIONS / REFERENCES
beg = begin(s)(ning)
dec = decreas(e)(s)(ing)
dpn(s) = double pointed needle(s)
inc = increas(e)(s)(ing)
k = knit
p = purl
p2tog = purl 2 together
Pm = place marker
rem = remain(s)(ing)
rep = repeat(s)(ing)
Rev St st = reverse stockinette stitch
rnd(s) = round(s)
RS = right side
sm = slip marker
st(s) = stitch(es)
tog = together
WS = wrong side


Every effort has been made to have the knitting and crochet instructions accurate and complete. We cannot be responsible for variance of individual knitters and crocheters, human errors, or typographical mistakes.
We want your project to be a success! If you need help with this or any other Lion Brand pattern, e-mail support is available 7 days per week by mailing support@lionbrand.com.

For over a thousand free patterns available in versions for the vision-impaired, visit our website http://www.LionBrand.com

To order, visit our website http://www.e-yarn.com or call: (800) 258-9276 any time!

Copyright ©1998-2011 Lion Brand Yarn Company, all rights reserved. No pattern or other material may be reproduced -- mechanically, electronically, or by any other means, including photocopying -- without written permission of Lion Brand Yarn Company.

Click here for Non-Braille display: View With Images